[amayausers] Re: Nylon and Pulling

We changed the needles, wrapped the hoop with a Gauztex bandage and used
Poly backing.  Stitching now, if it does not work I will shoot the file your
way.  I need the jackets by Sunday at the latest.  File by sometime
tomorrow?  Lets see what we end up with.

Lisa & Don Ridley
Wolf Embroidery
Wolfemb@xxxxxxxx
----- Original Message -----
From: "Sharon" <springer37@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, December 30, 2004 1:37 PM
Subject: [amayausers] Re: Nylon and Pulling


> Send it to us Lisa and we will take a look.  How soon are you needing this
> to be done?
> Rod Springer
> Melco Trained Technician/Owner
> (Design Shop Pro+ Digitizing)
> Boise, ID
> (208) 938-3038
> springer37@xxxxxxxxxxxx
> ----- Original Message -----
> From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Thursday, December 30, 2004 11:08 AM
> Subject: [amayausers] Re: Nylon and Pulling
>
>
> > I have poly mesh that I can use because the lining is white.  Should I
use
> > that with regular backing or alone?
> >
> > I increased the Pull comp from 100-110% this is all that I could
increase.
> > I enlarged the design way more than recommended, but it seemed to stitch
> > well on the sample.
> >
> > Is Rod able to look at the design?  I'm willing to pay, my digitizer is
on
> > vacation.
> >
> > Lisa & Don Ridley
> > Wolf Embroidery
> > Wolfemb@xxxxxxxx
> > ----- Original Message -----
> > From: "Sharon" <springer37@xxxxxxxxxxxx>
> > To: <amayausers@xxxxxxxxxxxxx>
> > Sent: Thursday, December 30, 2004 12:44 PM
> > Subject: [amayausers] Re: Nylon and Pulling
> >
> >
> > > Depending on the color of the nylon jackets and the weight of the
> lining,
> > > Lisa, I would use a poly-mesh cutaway if the nylon is
white--otherwise,
> a
> > > medium weight cutaway if the design is pretty dense.  I like to use a
> > weight
> > > that is similar to the weight of my garment but if the design is
pretty
> > > "heavy" then I use a heavier cutaway.  Hooping needs to be tight but
> don't
> > > stretch your fabric.  At times I have used strips of rubber shelf
lining
> > > inside my hoop to help anchor the fabric if it tends to slip. If you
> > > enlarged the design, how much larger did you enlarge it?  You may need
> to
> > > add density and pull comp both.  I would probably start with adding
20%
> > pull
> > > comp and try it on a scrap of nylon to test it.  I have to run to my
> other
> > > job for a bit but Rod is here and can tell you where to find those
> > settings
> > > if you need help.
> > > Sharon
> > > Rod Springer
> > > Melco Trained Technician/Owner
> > > (Design Shop Pro+ Digitizing)
> > > Boise, ID
> > > (208) 938-3038
> > > springer37@xxxxxxxxxxxx
> > > ----- Original Message -----
> > > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> > > To: <amayausers@xxxxxxxxxxxxx>
> > > Sent: Thursday, December 30, 2004 10:21 AM
> > > Subject: [amayausers] Re: Nylon and Pulling
> > >
> > >
> > > > Cut Away Stabilizer.  Very tight hooping.  8" X 3.5"  Stock design
> that
> > I
> > > > enlarged.(Probably too much.)  No pull comp on my end.  I'm not a
> > > digitizer
> > > > and know very little about the process.
> > > >
> > > > Lisa & Don Ridley
> > > > Wolf Embroidery
> > > > Wolfemb@xxxxxxxx
> > > > ----- Original Message -----
> > > > From: "Sharon" <springer37@xxxxxxxxxxxx>
> > > > To: <amayausers@xxxxxxxxxxxxx>
> > > > Sent: Thursday, December 30, 2004 11:47 AM
> > > > Subject: [amayausers] Re: Nylon and Pulling
> > > >
> > > >
> > > > > Hi Lisa,
> > > > > What stabilizer are you using? How tight are you hooping?  How
large
> > is
> > > > the
> > > > > design?  Is the design digitized by someone or a commercial
design?
> > > Have
> > > > > you put any pull comp in?
> > > > > Sharon
> > > > >
> > > > > Rod Springer
> > > > > Melco Trained Technician/Owner
> > > > > (Design Shop Pro+ Digitizing)
> > > > > Boise, ID
> > > > > (208) 938-3038
> > > > > springer37@xxxxxxxxxxxx
> > > > > ----- Original Message -----
> > > > > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> > > > > To: <amayausers@xxxxxxxxxxxxx>
> > > > > Sent: Thursday, December 30, 2004 9:21 AM
> > > > > Subject: [amayausers] Re: Nylon and Pulling
> > > > >
> > > > >
> > > > > > I'm stitching out Cheerleader jackets made of Polyester shell
and
> a
> > > thin
> > > > > > cotton liner.  The design stitched perfectly on backing but when
I
> > > > > stitched
> > > > > > on the jacket it pulled.  Put a pucker in the jacket and did not
> > > outline
> > > > > > properly.  Material thickness is set at 4
> > > > > >
> > > > > > Any Suggestions?
> > > > > >
> > > > > > Lisa & Don Ridley
> > > > > > Wolf Embroidery
> > > > > > Wolfemb@xxxxxxxx
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
>
>
>

Other related posts: