[amayausers] Re: Nylon and Pulling

Well... I need the jackets for Sunday at the latest.  If you could take a
peak ASAP and let me know if you think it will help we can go from there.
Maybe all we need to do is the other adjustments.  We changed the needles,
wrapped the frame and put on the nylon backing.  We are stitching now, will
let you know if it worked in about 25 minutes.
Lisa & Don Ridley
Wolf Embroidery
Wolfemb@xxxxxxxx
----- Original Message -----
From: "Sharon" <springer37@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, December 30, 2004 1:37 PM
Subject: [amayausers] Re: Nylon and Pulling


> Send it to us Lisa and we will take a look.  How soon are you needing this
> to be done?
> Rod Springer
> Melco Trained Technician/Owner
> (Design Shop Pro+ Digitizing)
> Boise, ID
> (208) 938-3038
> springer37@xxxxxxxxxxxx
> ----- Original Message -----
> From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Thursday, December 30, 2004 11:08 AM
> Subject: [amayausers] Re: Nylon and Pulling
>
>
> > I have poly mesh that I can use because the lining is white.  Should I
use
> > that with regular backing or alone?
> >
> > I increased the Pull comp from 100-110% this is all that I could
increase.
> > I enlarged the design way more than recommended, but it seemed to stitch
> > well on the sample.
> >
> > Is Rod able to look at the design?  I'm willing to pay, my digitizer is
on
> > vacation.
> >
> > Lisa & Don Ridley
> > Wolf Embroidery
> > Wolfemb@xxxxxxxx
> > ----- Original Message -----
> > From: "Sharon" <springer37@xxxxxxxxxxxx>
> > To: <amayausers@xxxxxxxxxxxxx>
> > Sent: Thursday, December 30, 2004 12:44 PM
> > Subject: [amayausers] Re: Nylon and Pulling
> >
> >
> > > Depending on the color of the nylon jackets and the weight of the
> lining,
> > > Lisa, I would use a poly-mesh cutaway if the nylon is
white--otherwise,
> a
> > > medium weight cutaway if the design is pretty dense.  I like to use a
> > weight
> > > that is similar to the weight of my garment but if the design is
pretty
> > > "heavy" then I use a heavier cutaway.  Hooping needs to be tight but
> don't
> > > stretch your fabric.  At times I have used strips of rubber shelf
lining
> > > inside my hoop to help anchor the fabric if it tends to slip. If you
> > > enlarged the design, how much larger did you enlarge it?  You may need
> to
> > > add density and pull comp both.  I would probably start with adding
20%
> > pull
> > > comp and try it on a scrap of nylon to test it.  I have to run to my
> other
> > > job for a bit but Rod is here and can tell you where to find those
> > settings
> > > if you need help.
> > > Sharon
> > > Rod Springer
> > > Melco Trained Technician/Owner
> > > (Design Shop Pro+ Digitizing)
> > > Boise, ID
> > > (208) 938-3038
> > > springer37@xxxxxxxxxxxx
> > > ----- Original Message -----
> > > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> > > To: <amayausers@xxxxxxxxxxxxx>
> > > Sent: Thursday, December 30, 2004 10:21 AM
> > > Subject: [amayausers] Re: Nylon and Pulling
> > >
> > >
> > > > Cut Away Stabilizer.  Very tight hooping.  8" X 3.5"  Stock design
> that
> > I
> > > > enlarged.(Probably too much.)  No pull comp on my end.  I'm not a
> > > digitizer
> > > > and know very little about the process.
> > > >
> > > > Lisa & Don Ridley
> > > > Wolf Embroidery
> > > > Wolfemb@xxxxxxxx
> > > > ----- Original Message -----
> > > > From: "Sharon" <springer37@xxxxxxxxxxxx>
> > > > To: <amayausers@xxxxxxxxxxxxx>
> > > > Sent: Thursday, December 30, 2004 11:47 AM
> > > > Subject: [amayausers] Re: Nylon and Pulling
> > > >
> > > >
> > > > > Hi Lisa,
> > > > > What stabilizer are you using? How tight are you hooping?  How
large
> > is
> > > > the
> > > > > design?  Is the design digitized by someone or a commercial
design?
> > > Have
> > > > > you put any pull comp in?
> > > > > Sharon
> > > > >
> > > > > Rod Springer
> > > > > Melco Trained Technician/Owner
> > > > > (Design Shop Pro+ Digitizing)
> > > > > Boise, ID
> > > > > (208) 938-3038
> > > > > springer37@xxxxxxxxxxxx
> > > > > ----- Original Message -----
> > > > > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> > > > > To: <amayausers@xxxxxxxxxxxxx>
> > > > > Sent: Thursday, December 30, 2004 9:21 AM
> > > > > Subject: [amayausers] Re: Nylon and Pulling
> > > > >
> > > > >
> > > > > > I'm stitching out Cheerleader jackets made of Polyester shell
and
> a
> > > thin
> > > > > > cotton liner.  The design stitched perfectly on backing but when
I
> > > > > stitched
> > > > > > on the jacket it pulled.  Put a pucker in the jacket and did not
> > > outline
> > > > > > properly.  Material thickness is set at 4
> > > > > >
> > > > > > Any Suggestions?
> > > > > >
> > > > > > Lisa & Don Ridley
> > > > > > Wolf Embroidery
> > > > > > Wolfemb@xxxxxxxx
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
>
>
>


-- Binary/unsupported file stripped by Ecartis --
-- Type: application/octet-stream
-- File: Lions.ofm

Other related posts: