[amayausers] Re: Nylon and Pulling

Also Lisa, use the smallest Sharp needle you have--like a 65/9 Sharp.
Rod Springer
Melco Trained Technician/Owner
(Design Shop Pro+ Digitizing)
Boise, ID
(208) 938-3038
springer37@xxxxxxxxxxxx
----- Original Message ----- 
From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, December 30, 2004 10:21 AM
Subject: [amayausers] Re: Nylon and Pulling


> Cut Away Stabilizer.  Very tight hooping.  8" X 3.5"  Stock design that I
> enlarged.(Probably too much.)  No pull comp on my end.  I'm not a
digitizer
> and know very little about the process.
>
> Lisa & Don Ridley
> Wolf Embroidery
> Wolfemb@xxxxxxxx
> ----- Original Message -----
> From: "Sharon" <springer37@xxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Thursday, December 30, 2004 11:47 AM
> Subject: [amayausers] Re: Nylon and Pulling
>
>
> > Hi Lisa,
> > What stabilizer are you using? How tight are you hooping?  How large is
> the
> > design?  Is the design digitized by someone or a commercial design?
Have
> > you put any pull comp in?
> > Sharon
> >
> > Rod Springer
> > Melco Trained Technician/Owner
> > (Design Shop Pro+ Digitizing)
> > Boise, ID
> > (208) 938-3038
> > springer37@xxxxxxxxxxxx
> > ----- Original Message -----
> > From: "Wolf Embroidery" <Wolfemb@xxxxxxxx>
> > To: <amayausers@xxxxxxxxxxxxx>
> > Sent: Thursday, December 30, 2004 9:21 AM
> > Subject: [amayausers] Re: Nylon and Pulling
> >
> >
> > > I'm stitching out Cheerleader jackets made of Polyester shell and a
thin
> > > cotton liner.  The design stitched perfectly on backing but when I
> > stitched
> > > on the jacket it pulled.  Put a pucker in the jacket and did not
outline
> > > properly.  Material thickness is set at 4
> > >
> > > Any Suggestions?
> > >
> > > Lisa & Don Ridley
> > > Wolf Embroidery
> > > Wolfemb@xxxxxxxx
> > >
> > >
> >
> >
> >
>
>

Other related posts: