[amayausers] Re: Nu-Fit Caps

Yes, needles are breaking low and also near center seam. I found a local
embroiderer who is willing to help me out on this one, and I too am saying
"never again"! Flagging is also a BIG issue. Thanks for the input. Misery
loves company :~)

Evelyn




> Evelyn,
> I sewed 48 of those last year and said never again. I had to move the
design
> up about 3/8 inch from where I would normally sew it, slow the machine
down
> to 800 spm to get them done. My problem was getting them hooped tightly
> enough to eliminate flagging. Where in the design are you breaking
needles?
> If close to the bill, try bending the bill back towards the cap after you
> hoop it. This may let the bottom of the cap lay down closer to the needle
> plate. Give us more info, one of the GURU'S may be able to assist.
>
> Herb
> Royal Embroidery
> ----- Original Message ----- 
> From: "Evelyn Runge" <erunge@xxxxxxxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, April 26, 2005 5:15 AM
> Subject: [amayausers] Nu-Fit Caps

Other related posts: