Hello,
sandinmyshoes has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of Thread coming loose while sewing.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6531-Thread-coming-loose-while-sewing
Here is the message that has just been posted:
***************
I have 2 Amaya XTS, I was running a 19K logo on 24 shirts and pullovers.
Machines were running great until the last 3 or 4 pieces. I did maintence on
machines before I started, new needles etc. All of the sudden one of the
machines seemed to come unthreaded and backlash so that the thread was
everywhere, all the way up to the red feed rollers.
I thought it was a timing issues but we checked hook timing, and many of the
other critical measurements. The cable was off we corrected that and there was
a lot of improvement.
Still having upper thread moving unattached or breaking, and the thread sensors
not
Icing up on it and thread being feed everywhere.
Any suggestions would be greatly appreciated!
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================