[amayausers] Re: New Amaya owners

John-
A picture is worth a thousand words, as they say, so if you ever find
yourself holding the camera when your setup is, well, set up, then a picture
would be great! But please don't spend any production time on it-

My only be-fuddlement is whether the heavy hat-backing gets stitched into
your design (I think it must) or if is somehow kept out of the fray? Sounds
like it goes under the clamp frame, gets stitched, moves around with
everything... now you are finished and you just pull it out through the hoop
and trim with your other backing, yes? Hopefully I have it figured out,
since you have been kind enough to explain and then clarify besides.

Regards-
David O.
----- Original Message ----- 
From: "John and Mary Kyler" <john@xxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Sunday, September 14, 2003 6:23 PM
Subject: Re: [amayausers] New Amaya owners


> What I do is put (if I use a sticky backing) on the item.... This is only
to
> help if I have to remove stitches... The bags are stable enough that no
> backing is really needed (even on an  EMT)
> Clamp and mount it and then slip a piece of heavy hat backing between the
> needle plate and the clamp/bag....
> thus when the clamp frame gets close to the needle plate the backing ramps
> it up to avoid the jams on the needle plate and clamp.
> Does that make sense?  Or I can shoot a picture maybe that might make more
> sense..
> john
> A Golden Stitch
> ----- Original Message ----- 
>
> > Just to clarify-
> > are you using the heavy tearaway as your standard backing? or by "below
> the
> > clamp frame" do you refer to a more creative configuration?
> >
> > It does make sense that a heavy tearaway would help suspend the clamp as
> it
> > moves across the needle plate.
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: