[amayausers] Re: New Amaya owners

What I do is put (if I use a sticky backing) on the item.... This is only to
help if I have to remove stitches... The bags are stable enough that no
backing is really needed (even on an  EMT)
Clamp and mount it and then slip a piece of heavy hat backing between the
needle plate and the clamp/bag....
thus when the clamp frame gets close to the needle plate the backing ramps
it up to avoid the jams on the needle plate and clamp.
Does that make sense?  Or I can shoot a picture maybe that might make more
sense..
john
A Golden Stitch
----- Original Message ----- 

> Just to clarify-
> are you using the heavy tearaway as your standard backing? or by "below
the
> clamp frame" do you refer to a more creative configuration?
>
> It does make sense that a heavy tearaway would help suspend the clamp as
it
> moves across the needle plate.



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: