[amayausers] Re: New Amaya owners

I have used heavy tearaway below the clamp frame and it will lift the clamp
up when it gets close to the needle plate.
Do the same with the Fast Frames
John
A Golden Stitch
----- Original Message ----- 
From: "Linen Barn" <linen@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Saturday, September 13, 2003 10:43 PM
Subject: Re: [amayausers] New Amaya owners


> I usually bend my arms that the clamp hooks onto the machine with so I
have
> enough clearance on the needle plate.  It wants to bounce by doing this so
I
> usually use a raised needle plate to stop the flagging.  I mostly use my
> clamp for flexfit hat backs and sides of any hats and occationally other
> misc items.  I use regular round hoops for sleeves and regular cap backs.
I
> am so used to doing them this way it is actually faster for me.
>
> Aaron Sargent
> The Linen Barn
> linen@xxxxxxxxxxx
> Medford, OR
>
> ----- Original Message -----
> From: "O'Connor & Co. Custom Embroidery" <oconnorco@xxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxxxxx>
> Sent: Saturday, September 13, 2003 4:12 PM
> Subject: Re: [amayausers] New Amaya owners
>
>
> > I may end up getting the larger clamp system as well: I am a little
> > disappointed in the "sewable" area that is left after I setup the limits
> for
> > the individual frames. Other than that, I think I am getting the hang of
> it.
> >
> > Do your frames ride up on the needle plate? or do you have them set to
> stay
> > clear? I'd be interested in swapping settings when you set yours up on
the
> > Amaya.
> >
> > thanks-
> > -David O.
> > ----- Original Message -----
> > From: "Linen Barn" <linen@xxxxxxxxxxx>
> > To: <amayausers@xxxxxxxxxxxxxxxx>
> > Sent: Saturday, September 13, 2003 6:39 PM
> > Subject: Re: [amayausers] New Amaya owners
> >
> >
> > > I have the smaller Hooptech Clamp system and also have the full set of
> > > Fastframes.  I plan to get the larger Clamp System soon.  I have not
> used
> > > the Fasframes since I got the clamping system.  It can do everything
the
> > > fastframes do and is easier.  I have not yet used the Clamping system
on
> > the
> > > AMAYA's as I use them for mostly contract work since they sew so fast.
> I
> > > use the Clamp System on the EMT's and it works great.
> > >
> > > Aaron Sargent
> > > The Linen Barn
> > > linen@xxxxxxxxxxx
> > > Medford, OR
> > >
> > > ----- Original Message -----
> > > From: "Captain Gold" <captaingold@xxxxxxxxxxxxx>
> > > To: <amayausers@xxxxxxxxxxxxxxxx>
> > > Sent: Saturday, September 13, 2003 3:02 PM
> > > Subject: Re: [amayausers] New Amaya owners
> > >
> > >
> > > > Welcome!
> > > >
> > > > I'm in London, OH! Maybe we should get together and "talk shop"
> > sometime.
> > > >
> > > > I've not used the Hooptech system, but am using Fast Frames. While I
> > have
> > > > to clean (and many times replace) needles after using the "sticky"
> > stuff,
> > > I
> > > > don't have any complaints specifically. I figure it's not a bad
thing
> to
> > > > change needles after a good sized job anyway.
> > > >
> > > > What are you planning on using the Hooptech for? I expect that I
will
> > > > invest in it or something similar when I need to for heavy items,
but
> > have
> > > > not encouraged that direction from my customers yet. I think
Hooptech
> > and
> > > > Fast Frames are for two different uses.
> > > >
> > > > Connie Bechtel
> > > > Wyvern Productions.
> > > >
> > > > At 12:18 PM 9/13/03, you wrote:
> > > > >Hello all-
> > > > >Just our introduction as we have stepped up from a Viking Designer
1
> to
> > > > >the Melco Amaya. Needless to say, it is quite an adjustment. Our
> little
> > > > >side business was just big enough to generate some orders that made
> us
> > > > >cringe for the tedium of the 300 spm and single-needle approach. I
do
> > > have
> > > > >a question for the group already, but I'll post it separately.
> Looking
> > > > >forward to communicating with the folks on the list.
> > > > >Sincerely,
> > > > >
> > > > >David & Lisa O'Connor
> > > > >O'Connor & Co. Custom Embroidery
> > > > >Westerville, OH
> > > >
> > > >
> > >
> ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> > > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> > >
> > >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: