This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/165.html#000001 If you have the needle plate off, blow out the loose stuff, then find your little mini bottle brush and get in with that-you may find more thread. Then grab a good pair of tweezers and start working the threads out that are stuck in there. Remember-have the machine SHUT OFF so there is no chance of anything moving while your fingers are in there. If you reach up under the 'belly of the beast' you will find the 'drive shaft' rod up in the housing-and you can turn that with your hand and move the bobbin stuff around while you pull on thread and it should release. Then make this a habit to clean out under that plate more often-or anytime you get a 'birdsnest' in a sewout-that's a good sign loose thread is going to be in there. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================