[amayausers.com] Re: Needle hit hoop
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 2 Dec 2008 19:13:31 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/567.html#000004
He's right about tracing...and I'm one that preaches it!
But.......yup, I forgot in the middle of a batch of sweat pants (for another
shop! no replacements!)
and ran into 'hoop limit' after it stitched the soccer ball in the
middle...starting the letter and 'ding'....fortunately I was using the speed
frame and I reset design, moved the frame forward and cut off the part of the
first letter-then carefully pulled the sweatpants down a half inch.
Went into design, 'moved' to 3rd needle, and did lettering over. If you didn't
notice the curved lettering was a little 'low' around the ball then it's fine
and no ruined job. But...it could have been worse! After that...no matter how
centered I thought each pair was...I traced!
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
