[amayausers] Re: Need Help - Anyone?

John,
Been playing with your design. Get back to me with your opinion.
Herb
Royal Embroidery
----- Original Message ----- 
From: "John Yaglenski" <john@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Saturday, April 30, 2005 3:48 PM
Subject: [amayausers] Re: Need Help - Anyone?

> Well, looks like I am SOL unless someone with pro plus has a few moments 
> to lend a hand.  Yet another reason to upgrade I guess.
>
> - - - -
> John Yaglenski
> Chairman & CEO, Levelbest Communications
> I: http://www.levelbest.com
> P: 888.229.1779 / 301.591.2481
>
> Levelbest Network Sites Include:
>
> intercot.com / webdisney.com / intercotwest.com
> urbanamaryland.com / mousehut.com / udflyers.com
> levelbestembroidery.com
>
>
>
> ---------- Original Message ----------------------------------
> From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
> Reply-To: amayausers@xxxxxxxxxxxxx
> Date:  Sat, 30 Apr 2005 14:12:03 -0700
>
>>The design file is expanded data. In order to change the type of fill it
>>would need to be converted to wireframe. Converting this to wireframe
>>will create multiple fill objects and applying a pattern to multiple
>>fill objects will not give you a uniform look. So, it needs to be
>>digitized again as one complex fill object which can be done in
>>DesignShop. This level also allows you to apply a limited number of
>>patterns but to create a custom feather pattern you would need Pro+
>>level.
>>
>>Janel Harris
>>Dimensional Designs
>>http://www.dimdesigns.com
>>DesignShop Digitizing
>>Melco On-Site Training
>>
>>
>>-----Original Message-----
>>From: amayausers-bounce@xxxxxxxxxxxxx
>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of John Yaglenski
>>Sent: Saturday, April 30, 2005 12:05 PM
>>To: amayausers@xxxxxxxxxxxxx
>>Subject: [amayausers] Need Help - Anyone?
>>
>>Can anyone help with this?  We should have asked for this when we had it
>>digitized but I am trying to figure out if there is a way to do this
>>with the version we have or even in the pro version.
>>
>>JOHN
>>
>>
>>
>>Re: Need Help With A Design - Can You Do Feathers?
>>From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>>To: <amayausers@xxxxxxxxxxxxx>
>>Date: Fri, 29 Apr 2005 10:12:12 -0400
>>
>>
>>Tap.... Tap.... Tap.... Hello?  Is this thing on?  Everyone must be too
>>busy earning money! :)
>>
>>Does anyone know how to accomplish this in Design Shop?  I have the
>>level below Pro.
>>
>>Thanks!
>>JOHN
>>
>>
>>
>>---------- Original Message ----------------------------------
>>From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>>Reply-To: amayausers@xxxxxxxxxxxxx
>>Date:  Thu, 28 Apr 2005 20:55:56 -0400
>>
>>>We have a design that my wife was hoping someone could help us with.
>>Her wish
>>>was to edit the grey fill that composes the hawk with a fill pattern
>>that
>>>looks like feathers.
>>>
>>>Problem is, I click on properties for that area and don't get the
>>option to
>>>change the fill.  I am guessing that's not available at my level of
>>design
>>>shop.
>>>
>>>If you can change that or tell me how (if I am missing something) we
>>would be
>>>most appreciative!
>>>
>>>The file is at
>>http://www.levelbestembroidery.com/customers/files/seahawk.ofm
>>>
>>>John Y
>>>Levelbest Embroidery
>>>
>>>- - - -
>>>John Yaglenski
>>>Chairman & CEO, Levelbest Communications
>>>I: http://www.levelbest.com
>>>P: 888.229.1779 / 301.591.2481
>>>
>>>Levelbest Network Sites Include:
>>>
>>>intercot.com / webdisney.com / intercotwest.com
>>>urbanamaryland.com / mousehut.com / udflyers.com
>>>levelbestembroidery.com
>>
>>
>>
>>
>>
>>
>
>
> 


-- Binary/unsupported file stripped by Ecartis --
-- Type: application/octet-stream
-- File: My Seahawk.ofm

Other related posts: