This message was posted by GF on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/885.html#000001 Try density at 3.2 and then check auto-density. Drop your pull comp from 2 pt to 1pt. Also, check your stitch length, and try 20pt. Check your bobbin, and your presser foot. I would at least have a center walk underlay at 20pt as well. Hope this helps some. For the lettering that is 1-inch, use a zigzag underlay. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================