[amayausers] Re: Machine Settings

 Thanks Jeff,

  We currently have Revisions:
 RSA 03.13
 CSA 01.70

 Rod Springer


----- Original Message ----- From: "Jeff Banks" <banksje@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 1:03 PM
Subject: [amayausers] Re: Machine Settings


> Rod,
>
> The 6.08.522 is officially released. The new files I have are different as
> I have not given them to anyone at this point, and they were just made
> Monday. :) What version or RSA and CSA are you using?
>
> Jeff Banks
> Melco Embroidery Systems
>
> ----- Original Message ----- > From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, November 22, 2005 12:22 PM
> Subject: [amayausers] Re: Machine Settings
>
>
>> Jeff,
>>
>> We received some upgraded files for the 6.08 while we were at advanced
>> tech training Oct/Nov. Are these the files/upgrades you are referring to?
>> What we are testing now is 6.08.522.
>>
>> Rod Springer
>>
>> ----- Original Message ----- >> From: "Jeff Banks" <banksje@xxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Tuesday, November 22, 2005 11:43 AM
>> Subject: [amayausers] Re: Machine Settings
>>
>>
>> > Herb,
>> >
>> > The presser foot is adjusted differently on the newer machine for caps
>> than
>> > on the older machine. For the newer machine, you want it down and about
>> 2 to
>> > 4 clicks from the bottom. If you were adjusting it up all the way as
>> for the
>> > older machine, this will cause problems.
>> >
>> > Also, there are some new RSA files and a CSA file for the Auto Thread
>> feed
>> > stuff. The work on the Auto Actifeed feature is still in progress and
>> > changes and improvements are still being made regularly. The newer
>> files
>> > will work better as well. If you would be interested in trying the new
>> > files, I can send them to you. They have not been officially released
>> yet,
>> > but if you would be willing to try them out I would be willing to send
>> them
>> > to you.
>> >
>> > Jeff Banks
>> > Melco Embroidery Systems
>> >
>> > ----- Original Message ----- >> > From: "HK Acree" <hkacree@xxxxxxxxxxxx>
>> > To: <amayausers@xxxxxxxxxxxxx>
>> > Sent: Tuesday, November 22, 2005 9:24 AM
>> > Subject: [amayausers] Machine Settings
>> >
>> >
>> > Hey Group,
>> > Having a bit of an issue here. New machine arrived Saturday, along with
>> the
>> > thread feed roller upgrade for the older machine. Upgraded OS software
>> as
>> > well. Sewed some flats with both machines using the auto material
>> thickness,
>> > the only issue was the new machine missed trimming the bobbin about 30%
>> of
>> > the time. Then I started sewing caps on the new machine, again using
>> the
>> > auto MT feature and began to install the roller upgrade on the old
>> girl. The
>> > caps sewed horrible, thread breaks and fraying thread. The OS was
>> showing
>> > the thread feed varying from 2 to 6 as it sewed. Turned this feature
>> off and
>> > ran at MT of 10 but results were not much better. Still breaking
>> thread.
>> > I mention the roller upgrade because I found the note that says the new
>> > rollers may require a 1-2 point higher MT to work. The question is,
>> would
>> > the higher MT also apply to the new machine as well? Are my issues
>> because I
>> > am running the new machine at settings that worked with the old
>> > machine/roller combination. Any thoughts.
>> >
>> >
>> > Herb
>> > Royal Embroidery
>> >
>> >
>>
>>
>>
>>
>
>




Other related posts: