[amayausers] Re: Machine Settings

Jeff:

Does Melco ever plan to offer updates via download (not major revs) but
patches to the OS or incremental improvements?  Sure would beat calling up
and asking for new versions every time they come out.  Or do they already
offer this?

Thanks!
John 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Banks
Sent: Tuesday, November 22, 2005 3:04 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Machine Settings

Rod,

 The 6.08.522 is officially released. The new files I have are different as
I have not given them to anyone at this point, and they were just made
Monday. :) What version or RSA and CSA are you using?

 Jeff Banks
 Melco Embroidery Systems

----- Original Message -----
From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 12:22 PM
Subject: [amayausers] Re: Machine Settings


>  Jeff,
>
>  We received some upgraded files for the 6.08 while we were at advanced 
> tech training Oct/Nov. Are these the files/upgrades you are referring to? 
> What we are testing now is 6.08.522.
>
>  Rod Springer
>
>  ----- Original Message ----- 
>  From: "Jeff Banks" <banksje@xxxxxxxxxxx>
>  To: <amayausers@xxxxxxxxxxxxx>
>  Sent: Tuesday, November 22, 2005 11:43 AM
>  Subject: [amayausers] Re: Machine Settings
>
>
>  > Herb,
>  >
>  > The presser foot is adjusted differently on the newer machine for caps 
> than
>  > on the older machine. For the newer machine, you want it down and about

> 2 to
>  > 4 clicks from the bottom. If you were adjusting it up all the way as 
> for the
>  > older machine, this will cause problems.
>  >
>  > Also, there are some new RSA files and a CSA file for the Auto Thread 
> feed
>  > stuff. The work on the Auto Actifeed feature is still in progress and
>  > changes and improvements are still being made regularly. The newer 
> files
>  > will work better as well. If you would be interested in trying the new
>  > files, I can send them to you. They have not been officially released 
> yet,
>  > but if you would be willing to try them out I would be willing to send 
> them
>  > to you.
>  >
>  > Jeff Banks
>  > Melco Embroidery Systems
>  >
>  > ----- Original Message ----- 
>  > From: "HK Acree" <hkacree@xxxxxxxxxxxx>
>  > To: <amayausers@xxxxxxxxxxxxx>
>  > Sent: Tuesday, November 22, 2005 9:24 AM
>  > Subject: [amayausers] Machine Settings
>  >
>  >
>  > Hey Group,
>  > Having a bit of an issue here. New machine arrived Saturday, along with

> the
>  > thread feed roller upgrade for the older machine. Upgraded OS software 
> as
>  > well. Sewed some flats with both machines using the auto material 
> thickness,
>  > the only issue was the new machine missed trimming the bobbin about 30%

> of
>  > the time. Then I started sewing caps on the new machine, again using 
> the
>  > auto MT feature and began to install the roller upgrade on the old 
> girl. The
>  > caps sewed horrible, thread breaks and fraying thread. The OS was 
> showing
>  > the thread feed varying from 2 to 6 as it sewed. Turned this feature 
> off and
>  > ran at MT of 10 but results were not much better. Still breaking 
> thread.
>  > I mention the roller upgrade because I found the note that says the new
>  > rollers may require a 1-2 point higher MT to work. The question is, 
> would
>  > the higher MT also apply to the new machine as well? Are my issues 
> because I
>  > am running the new machine at settings that worked with the old
>  > machine/roller combination. Any thoughts.
>  >
>  >
>  > Herb
>  > Royal Embroidery
>  >
>  >
>
>
>
>

Other related posts: