[amayausers] Re: Machine Settings

Rod,

The 6.08.522 is officially released. The new files I have are different as I have not given them to anyone at this point, and they were just made Monday. :) What version or RSA and CSA are you using?

Jeff Banks
Melco Embroidery Systems

----- Original Message ----- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 12:22 PM
Subject: [amayausers] Re: Machine Settings


 Jeff,

We received some upgraded files for the 6.08 while we were at advanced tech training Oct/Nov. Are these the files/upgrades you are referring to? What we are testing now is 6.08.522.

 Rod Springer

----- Original Message ----- From: "Jeff Banks" <banksje@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 11:43 AM
Subject: [amayausers] Re: Machine Settings


> Herb,
>
> The presser foot is adjusted differently on the newer machine for caps than
> on the older machine. For the newer machine, you want it down and about 2 to
> 4 clicks from the bottom. If you were adjusting it up all the way as for the
> older machine, this will cause problems.
>
> Also, there are some new RSA files and a CSA file for the Auto Thread feed
> stuff. The work on the Auto Actifeed feature is still in progress and
> changes and improvements are still being made regularly. The newer files
> will work better as well. If you would be interested in trying the new
> files, I can send them to you. They have not been officially released yet,
> but if you would be willing to try them out I would be willing to send them
> to you.
>
> Jeff Banks
> Melco Embroidery Systems
>
> ----- Original Message ----- > From: "HK Acree" <hkacree@xxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, November 22, 2005 9:24 AM
> Subject: [amayausers] Machine Settings
>
>
> Hey Group,
> Having a bit of an issue here. New machine arrived Saturday, along with the
> thread feed roller upgrade for the older machine. Upgraded OS software as
> well. Sewed some flats with both machines using the auto material thickness,
> the only issue was the new machine missed trimming the bobbin about 30% of
> the time. Then I started sewing caps on the new machine, again using the
> auto MT feature and began to install the roller upgrade on the old girl. The
> caps sewed horrible, thread breaks and fraying thread. The OS was showing
> the thread feed varying from 2 to 6 as it sewed. Turned this feature off and
> ran at MT of 10 but results were not much better. Still breaking thread.
> I mention the roller upgrade because I found the note that says the new
> rollers may require a 1-2 point higher MT to work. The question is, would
> the higher MT also apply to the new machine as well? Are my issues because I
> am running the new machine at settings that worked with the old
> machine/roller combination. Any thoughts.
>
>
> Herb
> Royal Embroidery
>
>






Other related posts: