[amayausers] Re: Letters Mushing

Thanks for your input, I will make some adjustments and see how things turn 
out!!!


Quoting Rod or Sharon <springer37@xxxxxxxxxxxx>:

> Jim,
> 
> This can be a common problem and complaint depending on the size of the
> 
> design. What is the vertical height of the design, including the
> lettering? 
> What size is the lettering and what font is it? How much pull comp has
> been 
> added to the lettering? What underlay is being used in the lettering? Is
> 
> this a keyboard font or a custom digitized font on the lettering? What 
> software are you using in Design Shop?
> 
>  With the keyboard lettering, as well as custom digitized lettering,
> extra 
> color breaks can be added between the individual letters. For example
> take 
> the name " AMAYA ", if centered, the middle  "A" would be right in the 
> middle of the center seam. If a color break were to be entered on both
> sides 
> of this letter than you could now use the" "Settings by Color" tools
> found 
> under the "Settings" tab while working in Amaya OS. This niffty tool
> allows 
> you to select the specific color, the "A" now being listed as it's own
> color 
> and change the speed, material thickness, column width etc, of the
> machine 
> just for this one letter.
> 
> Now, the arched lettering and the vertical height will always cause
> problems 
> if it is too high/tall. The best bet is to not have any cap design over
> 2" 
> in height for good results, maybe up to 2.25". I sometimes push my luck
> and 
> sew designs even up to 2.7" (depends on the design) but the taller the 
> design the more the design will suffer, especially lettering that has
> been 
> arched across the top of the sewing area......
> 
> Rod
> 
> Embroidery Cottage
> Rod & Sharon Springer
> Melco Trained Amaya Tech/Trainer
> Design Shop Pro+ Digitizing
> 
> Boise, ID  83713
> 208-938-3038
> ----- Original Message ----- 
> From: <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Saturday, April 16, 2005 4:28 PM
> Subject: [amayausers] Letters Mushing
> 
> 
> >I am attempting to do some baseball caps.  I have some text that is
> arched
> > over top of an image.  I am stitching the text from center out.  All
> of 
> > the
> > letters in the center are mushed, any suggesttions?
> >
> > Best Regards,
> > Jim Keil
> > Jersey Shore Screen Printing
> > 732.259.4542
> > 
> 
> 
> 



Best Regards,
Jim Keil
Jersey Shore Screen Printing
732.259.4542

Other related posts: