[amayausers] Re: Lettering

For t-shirt material I use 1 layer of 2oz cutaway backing and 1 solvy on top 
or 2 layers of poly mesh backing and 1 solvy with pretty good results. I 
think that 2 layers of 3oz backing would be unacceptable, no matter how 
close you trim, it would show through the shirt and not look very good.

Russell

----- Original Message ----- 
From: "Wolf Embroidery" <wolfemb@xxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, March 15, 2006 2:00 PM
Subject: [amayausers] Re: Lettering


> Good Afternoon!
>
> I'm in the process of doing up an order of Thin Spaghetti strap shirts.  I
> have played around with several fonts and settings as well as with the
> backing and material thickness and the result is always the same.  The
> lettering is to be red and the white bobbin keeps pulling through and
> showing.
>
> Any suggestions?
> Wolf Embroidery
> Wolfemb@xxxxxxxx
> Lisa and Don Ridley
>

Other related posts: