[amayausers] Re: Lee Denim Jackets
- From: "image embriodery" <imageembroidery@xxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 22 Nov 2005 14:13:17 -0500
I get quite a bit of use out of my rectangle fast frame for just that
situation.
I line it up with the zipper, turn the design on its side and clamp it on
all the way around.
Just did Carharts that way last week.
LuAnn
----- Original Message -----
From: "Beverly Thompson" <beverlyt@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 2:16 PM
Subject: [amayausers] Re: Lee Denim Jackets
Thanks for the info, i need to check into the clamping system.
But on these Jackets, the yoke is the top section, then there is a welt
seam, (like what goes down the side of jeans, very thick) then the pocket
Which the lapover that closes over pocket has a welt seam all the way
around that , and a brass button closer. Next time you see a levi
commerical look close someone will probably be wearing a jean jacket, and
you can see what I am talking about.
Regards,
Beverly Thompson
Perdido Beach Embroidery
----- Original Message -----
From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 12:11 PM
Subject: [amayausers] Re: Lee Denim Jackets
Beverly...do you have a fast frame? You could use the 'long' one, go in
to
the yoke from the zipper edge of the jacket, rotate your embroidery and
use
clamps to hold it on. Don' t forget to get all the extra jacket up on the
table so the weight doens't pull it off.
Definitely a job for the clamping system...ours is hopefully on the way!
Ed, the 'yoke' is the overlapping material on jackets, etc. that comes
over
the shoulder and part way down the chest-instead of a seam up on the
shoulder ridge. Allows rain to roll off the shoulder instead of going
through a seam and getting you wetter than you want. Makes the jackets
look
'classy'.
On the Carhart and Sanmar PA jackets we do, to get a name over that
darned
zipper pocket on the right (the zipper is inside the jacket) we had to
use
the 7" hoop-so the whole pocket was 'in' the hoop-to get around that
thick
'seam' that pops the hoops open. Try that if you have to! And to make it
easier, rotate the jacket so you are sewing from the 'zipper' out
across-instead of having the jacket collar, etc. stuck under the needle
head. Makes it easier-use chalk to draw a straight line from the zipper
out
to line up to.
Roland
- References:
- [amayausers] Re: Lee Denim Jackets
- From: Roland R. Irish III
- [amayausers] Re: Lee Denim Jackets
- From: Beverly Thompson
Other related posts:
- » [amayausers] Lee Denim Jackets
- » [amayausers] Re: Lee Denim Jackets
- » [amayausers] Re: Lee Denim Jackets
- » [amayausers] Re: Lee Denim Jackets
- » [amayausers] Re: Lee Denim Jackets
- » [amayausers] Re: Lee Denim Jackets
But on these Jackets, the yoke is the top section, then there is a welt seam, (like what goes down the side of jeans, very thick) then the pocket Which the lapover that closes over pocket has a welt seam all the way around that , and a brass button closer. Next time you see a levi commerical look close someone will probably be wearing a jean jacket, and you can see what I am talking about.
Regards, Beverly Thompson Perdido Beach Embroidery
----- Original Message ----- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 12:11 PM
Subject: [amayausers] Re: Lee Denim Jackets
Beverly...do you have a fast frame? You could use the 'long' one, go in to
the yoke from the zipper edge of the jacket, rotate your embroidery and use
clamps to hold it on. Don' t forget to get all the extra jacket up on the
table so the weight doens't pull it off.
Definitely a job for the clamping system...ours is hopefully on the way!
Ed, the 'yoke' is the overlapping material on jackets, etc. that comes over
the shoulder and part way down the chest-instead of a seam up on the
shoulder ridge. Allows rain to roll off the shoulder instead of going
through a seam and getting you wetter than you want. Makes the jackets look
'classy'.
On the Carhart and Sanmar PA jackets we do, to get a name over that darned
zipper pocket on the right (the zipper is inside the jacket) we had to use
the 7" hoop-so the whole pocket was 'in' the hoop-to get around that thick
'seam' that pops the hoops open. Try that if you have to! And to make it
easier, rotate the jacket so you are sewing from the 'zipper' out
across-instead of having the jacket collar, etc. stuck under the needle
head. Makes it easier-use chalk to draw a straight line from the zipper out
to line up to.
Roland
- [amayausers] Re: Lee Denim Jackets
- From: Roland R. Irish III
- [amayausers] Re: Lee Denim Jackets
- From: Beverly Thompson