[amayausers] Re: Knit Beanies

Beverly,

I too have used cutaway with solvy for topping and the 12 cm hoop.  Turn =
the
beanie inside out and then hoop.  The ones I have done sewed out nicely.

Good luck.

Susan=20

Sewfly Embroidery

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of beverly thompson
Sent: Monday, December 27, 2004 11:10 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Knit Beanies


Hello everyone,
don't write in much but get a alot of info off amayausers e-mail. If =
anyone
can help or has info on this project please share.

I have a large order for Knit Beanies.  Was wondering if anyone has any
experiance with these.  I was going to use a fast frame, clamp sides of
beanie down and slip a piece of tearaway underneath.  do you have to use
topping.  Also they come in Cotton knit, what works best or does it =
matter.
they will just have the small shell logo and the wording Rotella-T. =20

any help would be appreciated.

Best Regards
Beverly t
Perdido Beach Embroidery


Other related posts: