[amayausers.com] Re: Individual names

This message was posted by Dorothy Compton on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/761.html#000001

Group names is a feature of DesignShop and yes it makes it really easy. You can 
manually do a group by placing each name one on top of the other (and the 
design if you need that too) with a color change in between each series. You 
will have a stack of names that you won't be able to read in OS just because of 
the stacking. In the color sequence you can put a stop after the color to allow 
you to switch bags. Instead of a "stop" I use a empty needle for the first 
color, that way I don't have to worry about any possiblity of thread 
needle/color shifting (this happened to me after a stop, the needle/color 
didn't advance correctly). So, if I don't catch the end of the first 
name/design, the machine moves to the empty needle and I'll get a "thread 
break"; then I'll manually move to the correct needle/color and go.

Another thing you could do is use the Design Queue. If you look at the bottom 
of the status windown (the right side of the screen in OS), you'll see a tab. 
Each name would be in its own file. Add each file to the queue. You'll have to 
load after each design is completed from this same screen.

Hope this makes sense. Good luck.

Dorothy Compton, Owner
Bee Embroidered
www.BeeEmbriodered.com (http://www.BeeEmbriodered.com)
(916) 635-7467

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: