[amayausers] Re: INKJET TRANSFER - EMERGENCY

This message was posted by oaktree on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/11/3.html#000001

Believe it or not, I think lots of us have done this, I'll admit we have! 
First, turn it off, and when it's cooled you can use, plain water and a rag to 
get most of the transfer paper off, and then use "Goof Off" or "Goo B Gone" to 
get off the rest. If you have a plastic tool, or scraper that is the best. 
Don't use metal. If that does not work, or if you have residue, call 
Imprintables or Stahls on Monday, and they may a solution that you can buy. 
THEN, call Stahls and get some "cover sheets" or a Teflon sheet. This is your 
best line of defense to protecting the press while you are heat pressing all 
materials! 
Good luck, I know this frustration. It will basically be a lot of elbow grease 
to clean it. My sister did it to my press, the same day it arrived, except she 
was using lettering, on a tee....holy smokes, I thought that would NEVER come 
off! Jan

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: