[amayausers] Re: Hoop-tech clamping frames

Any other suggestions to keep in mind when setting up HoopTech? I just 
received my TCS1 and did a dry run installing on the machine, did that okay. 
I now need to do the hoop definitions and after your experience am a little 
leary. I have the tendency to engage fingers before brain much too often!!!


>From: "O'Connor & Co. Custom Embroidery" <oconnorco@xxxxxxxxxx>
>Reply-To: amayausers@xxxxxxxxxxxxxxxx To: "amayausers" 
><amayausers@xxxxxxxxxxxxxxxx>
>Subject: [amayausers] Hoop-tech clamping frames
>Date: Sat, 13 Dec 2003 07:50:53 -0500
>
>Not to belabor the point unnecessarily-
>but now that the dust has cleared (and my brain as well), I am realizing 
>that if I had only CLOSED the clamp while making adjustments, the handle of 
>the clamp never would have reached the back of the needle case and pushed 
>it off the rail.
>
>That would have saved me a bunch of work!
>
>Sincerely,
>
>David & Lisa O'Connor
>O'Connor & Co. Custom Embroidery
>Westerville, OH

_________________________________________________________________
Tired of slow downloads and busy signals?  Get a high-speed Internet 
connection! Comparison-shop your local high-speed providers here. 
https://broadband.msn.com


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: