[amayausers] Re: Help with Caps

  As far as I can tell, the sweatband is pulled all the way out.  I have
felt for the teeth and they seem to be right.  I have not shaped the bill of
the hat and I will try that.

  Thanks for the help,

  Teresa Murray
  Southern Stitches Embroidery
  southernstitches@xxxxxxxxxxxxx

  ----- Original Message -----
  From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
  To: <amayausers@xxxxxxxxxxxxxxxx>
  Sent: Monday, May 10, 2004 10:49 AM
  Subject: RE: [amayausers] Help with Caps


  > Teresa,
  >
  > Is the sweatband complete folded out of the way and the teeth gripping
  > just above it?
  >
  > Have you tried shaping the bill before hooping so that it doesn't pull
  > when clamped into the support arm?
  >
  >
  > Janel Harris
  > Dimensional Designs
  > http://www.dimdesigns.com
  > Contract Digitizer
  > Melco On-Site Trainer
  >
  >
  > -----Original Message-----
  > From: Teresa Murray [mailto:teresammurray@xxxxxxxxxxxxx]
  > Sent: Monday, May 10, 2004 6:34 AM
  > To: Amayausers@xxxxxxxxxxxxxxxx
  > Subject: [amayausers] Help with Caps
  >
  > Does anybody have any pointers on printing lettering on the side of caps
  > with the Amaya?  I am trying to put a name and one number on the front
  > left side of a cap.  It is stitching okay, except it is walking uphill
  > towards the front.  I'm getting frustrated as I think that it is hooped
  > correctly, but can't figure out what else it could be.  Any suggestions?
  >
  > TIA,
  >
  > Teresa Murray
  > Southern Stitches Embroidery
  > southernstitches@xxxxxxxxxxxxx
  >
  >
  >
  > ---------------------------------------------------------------------
  > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
  > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
  >




---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: