You will want to reset the design and also don't forget to re-center the hoop before sewing the next design. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx 541-770-2957 Medford, OR ----- Original Message ----- From: "Tom D'Auria" <lastczar@xxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Friday, October 20, 2006 6:04 AM Subject: [amayausers] Re: Help in getting out of stitching > you need to reset the design before you can load > another one. > > --- Griffin William <wag@xxxxxxxxxxxxxxxx> wrote: > >> I am in the beginning of the learning curve. >> >> I am trying to stitch a design in which the >> thread continually breaks. >> So, I decided that I would stop that and start >> over with another design. >> >> I push the "red" stop button. It stops. I have >> a green light. >> >> But, when I try to load another design, it >> states that I cannot load >> because the machine is busy. >> >> HELP! >> >> Bill >> >> William A. Griffin >> Roanoke Bible College >> Elizabeth City, N. C 27909 >> 252.334.2001 >> 252.335.2321 -home >> www.roanokebible.edu >> >> > =========================================================== >> >> >> The AmayaUsers Mailing List >> Website: http://www.amayausers.com >> Discussion Board: >> http://www.amayausers.com/boards >> Subscribe/Unsubscribe: >> http://www.amayausers.com/list >> >> > =========================================================== >> >> > > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =========================================================== > =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================