[amayausers.com] Re: Help With Machine and Software

This message was posted by Dorothy Compton on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/570.html#000001

It may be you have excess trims in the file either by design or by 
interpretation (meaning the number of jump stitches = trim is set too low). You 
can test the second one by going in to the OS, under settings (I'm not sure 
which tab) and see what the jumps=trim is set to....change the number to 
something slightly higher. If this eliminates your trims, great. If not, I 
would try once again to a slightly higher number. If still no success, you may 
need to look at the file in DS and eliminate the trims (DS also has an auto 
trim setting but look for manual trims first). Good Luck.

Dorothy Compton, Owner
Bee Embroidered
www.BeeEmbroidered.com (http://www.BeeEmbroidered.com)
(916) 635-7467

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: