[amayausers] Re: Help Sewing Caps

LuAnn,
Having just received your machine there is one item you may not be familiar 
with. The AMAYA Sacrifice. It is common knowledge for those of us that have 
had theirs for a while that she requires a sacrifice at times, usually 
during stressful times. If you are not inclined to offer this sacrifice, I 
am able to provide this service by proxy. Send one (1) large bottle of Crown 
Royal to the address listed below and I will make your problems go away.

P.S. You did not buy the wrong machine.


Herb
Royal Embroidery
1410 Warner Ave.
Lewiston, Id. 83501
----- Original Message ----- 
From: "LuAnn DeFrisco" <luann@xxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, May 26, 2005 5:58 PM
Subject: [amayausers] Re: Help Sewing Caps


> Okay, now I am a little worried about all of this!
> I just got my machine a couple of weeks ago and am going to training June
> 20-24th in New Jersey.
>
> All of the problem with caps is really beginning to scare me!
>
> Please tell me I did not make a mistake purchasing the Amaya?
> Thanks...
> LuAnn @ MySewingShop
> ----- Original Message ----- 
> From: "pat" <post@xxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Thursday, May 26, 2005 8:38 PM
> Subject: [amayausers] Re: Help Sewing Caps
>
>
>> I'm in the same boat, purchased the Amayas last November, and had a tech
>> check out the machine, and did the training class, and guess what - not
> one
>> hat that I would actually expect a client to pay for!!!!
>> Any suggestions would help we beginners!
>>
>> ----- Original Message -----
>> From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Thursday, May 26, 2005 8:16 AM
>> Subject: [amayausers] Re: Help Sewing Caps
>>
>>
>> > If Melco employees / trainers are listening.... There should be a
> totally
>> > separate course dedicated to nothing but doing hats as part of your
> AMAYA
>> > training.
>> >
>> > I'm a year and a half into this and find doing hats quite frustrating.
>> Only
>> > on a very few occasions have I produced something I would feel
> comfortable
>> > giving a client.  We had a tech come out because we were convinced our
>> > machine was defective because of the way it did hats...  Even after
> that,
>> we
>> > are still dissatisfied with the results and aren't doing much better.
>> >
>> > I know selecting the right hat has something to do with it as does
> keeping
>> > the height to 2 inches or under.  Can a hat expert on the AMAYA suggest
>> some
>> > good hats/brands that work well?
>> >
>> > John
>> >
>> >
>> >
>> >
>> > On 5/26/05 12:46 AM, "ImpressingPromo@xxxxxxx" 
>> > <ImpressingPromo@xxxxxxx>
>> > wrote:
>> >
>> > > I need some desperate advise on how to sew caps on the AMAYA.  We 
>> > > have
>> had
>> > > our machine for about a month and a half.  We have figured out the
>> sewing
>> > > flats
>> > > but these cap techniques are really tripping us up.  I have tried all
> of
>> the
>> > > steps in the manual but am still having problems.  I load a design
> that
>> I know
>> > > works for hats and get about 10 stitches per thread break.  We have
>> adjusted
>> > > the presser foot, speed, MT and cleaned the bobbin case. Any advise 
>> > > of
>> what I
>> > > am possibly doing wrong?
>> > > Thank you,
>> > >
>> > > Jimbo Childs
>> > > Impressing Promotions, LLC
>> > > 2575 Campus Drive
>> > > Suite 341
>> > > Klamath Falls, OR 97601
>> > > (541) 891-5748  Cell
>> > > (541) 273-5798  Office/Fax
>> > >
>> > >
>> > >
>> >
>> >
>> >
>>
>>
>>
>
>

Other related posts: