[amayausers] Re: Help - I'm stuck

301.874.0404 is our number here.  I will be glad to call you back so it's on
my dime.

JOHN 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Sharon
Sent: Sunday, August 22, 2004 6:40 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Help - I'm stuck

Hold on John--Rod is out mowing the lawn and I will have him respond in just
a little bit---if you have a phone near the machine, maybe you can call Rod
and he can walk you through the things to try...
Rod Springer
Melco Trained Technician
(We also do Design Shop Pro+ digitizing) Boise, ID
(208) 938-3038
springer37@xxxxxxxxxxxx
----- Original Message -----
From: "John Yaglenski" <john@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Sunday, August 22, 2004 4:21 PM
Subject: [amayausers] Help - I'm stuck


> My arms that hold the hoop are stuck in an off center postion.  I tried
> getting the hoop to center and it wont.  I also tried shutting down the
> machine and starting up again.  No luck.  Then I deleted the last job in
the
> queue from the amaya os and still nothing.  I am stuck off center.
>
> When I tell it to center from the keypad.... It moves right to the off
> center postion.  When I move right, it wont let me center the hoop.  It
goes
> only so far and stops.  I was getting all set to run some practice sewouts
> and I'm stuck.  This issue came up right afte the rotary hook oiling
notice
> came up, I ran it and cleared the notice.
>
> HELP.  :)
>
> JOHN
>
>

Other related posts: