[amayausers] Re: Help
- From: "Linen Barn" <linen@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 27 Feb 2006 14:59:59 -0800
I would highly recommend buying a ethernet card (around $20-30) and
installing it on your computer. I am not sure that you can use a USB
adapter with the AMAYA. Maybe Jeff Banks can shed a little more light here
but I would definetly say to add a network card is your best bet.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: "Barbara Hazelrig-Mirsky" <mirrig@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, February 27, 2006 2:45 PM
Subject: [amayausers] Help
>I purchased a used Amaya. It has not been used for at least two months
>now. It took a while to convince the previous owner that the dongle belongs
>with the software, not the computer. I finally got brave enough to connect
>the machine. I resolved some issues with the computer and decided to use an
>older computer with the OS only. Its 384 MB Ram, 30GB hard drive, Windows
>XP and a Pentium 4 processor. Ethernet has to be handled through a USB
>adapter because the computer doesn't have an ethernet connection built in.
>So far, no problems with the Amaya OS. Turned the machine on and the
>standard start up stuff - laser and status lights. the status light goes
>from green to red. Software apparently works. Machine apparently works.
>But the software and=
> the machine do not know the other exists. I purchased a new Melco
> ethernet cable and the machines still haven't been introduced. Can
> someone point me in the right direction to look for the cure? The
> Operator's tool kit is
> on back order -- won't arrive until after St. Patty's day. As time
> permits I will look back through the postings to learn as much as I can.
> I want to make sure the machine is running before I spend the money to
> transfer the license on the OS software or decide to sell it and buy a new
> one - might be less expensive after all. :-) Thank you!
>
>
>
Other related posts:
