[amayausers] Re: Help

Did you "Configure" your machine?  Look in help or the book for Powering up
the Amaya.

Terri

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Barbara
Hazelrig-Mirsky
Sent: Monday, February 27, 2006 4:46 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Help

I purchased a used Amaya.  It has not been used for at least two months now.
It took a while to convince the previous owner that the dongle belongs with
the software, not the computer.  I finally got brave enough to connect the
machine. I resolved some issues with the computer and decided to use an
older computer with the OS only.  Its 384 MB Ram, 30GB hard drive, Windows
XP and a Pentium 4 processor.  Ethernet has to be handled through a USB
adapter because  the computer doesn't have an ethernet connection built in.
So far, no problems with the Amaya OS.  Turned the machine on and the
standard start up stuff - laser and status lights.  the status light goes
from green to red.  Software apparently works.  Machine apparently works.
But the software and=
 the machine do not know the other exists.  I purchased a new Melco ethernet
cable and the machines still haven't been introduced.  Can someone point me
in the right direction to look for the cure?  The Operator's tool kit is
 on back order -- won't arrive until after St. Patty's day.  As time permits
I will look back through the postings to learn as much as I can.  I want to
make sure the machine is running before I spend the money to transfer the
license on the OS software or decide to sell it and buy a new one - might be
less expensive after all.  :-)  Thank you!

Other related posts: