[amayausers.com] Re: Heat Press Question

  • From: webmaster@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Thu, 29 Nov 2007 19:02:54 UT

This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/4/238.html#000003

If they sent you a replacement roll of vinyl with no problem-chances are there 
IS a problem with the vinyl and they knew about it. Test it when you get it 
in-if you have a spare sport grey that already is no good. Cut the same image 
in both, and apply them at the same time, same way. Then peel and see what 
happens. If they BOTH have a problem-then it's the sweatshirt. IF only one has 
a problem-then its the vinyl.
I did get a load of forest green shirts in one time where the screened image 
washed off in blotches on every one of them. I put a 'clamp on' light with a 
'bowl shield' around it inside the shirts and looked through the material-and 
you could SEE the fabric contaminated with oil or something. Called the 
company-and found out they had a contaminated machine making the material-but 
you couldn't see it on dark cloth. Good luck!
But try preheating and see if that helps.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: