Amaya does not need any special setup protocols as EDS3 as Mike mentioned. As Mike said hook your crossover cable to your computer to the Amaya. It should be that easy. Plug & play. Sounds like your computer ethernet card did not configure correctly? Kevin Wasik Melco Field Tech. Napa, CA. ----- Original Message ----- From: "Mike Wargo" <sati@xxxxxxx> To: <amayausers@xxxxxxxxxxxxxxxx> Sent: Sunday, August 03, 2003 2:11 PM Subject: Re: [amayausers] HELP!!! "Ethernet communications did not start correctly" > Jack, > Not sure if this is going to help, the crossover cable must > go from the NIC in the computer directly to the Amaya, the conventional Melcos > require IPS/SPX, and under the ADVANCED tab the FRAME TYPE needs to be set to > ETHERNET 802.3. > > Mike Wargo > Fox Hill > > Jack Peckham wrote: > > > Hi, I just recieved my AMAYA friday afternoon. By the time I got it set up, > > tech support had closed. > > Does anyone know the network protocol? > > Does it run TCP/IP? what IP address. > > It does not show up on my routers DHCP list. > > > > It came with a crossover cable. I tried hooking it up straight into my NIC & > > got a light, but I get a message "Ethernet communications did not start > > correctly, restart computer" I did & still got the massage. Therefore, I > > hooked up my router with patch cables. Same problem. When I hooked up the > > router, I went into it & looked at the DHCP list, no AMAYA. I thought I may > > have a NIC card problem, so I put in a card from an old computer & I still > > have the problem, so I am assuming I need to set up something in the network > > protocols so the AMAYA can be seen??? > > > > HELP!!! > > > > Thanks, > > Jack Peckham > > Greyt Threads > > > > jack@xxxxxxxxxxxxxxx > > web site www.idyllhounds.com > > > > _________________________________________________________________ > > Tired of spam? Get advanced junk mail protection with MSN 8. > > http://join.msn.com/?page=features/junkmail > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx