[amayausers] Re: HELP!!! "Ethernet communications did not start correctly"

Jack,
Make sure you're using a crossover cable, the yellow one.  The blue
networking cable won't work.  As Mike said, Plug & Play should take care of
it.
Frank
 Force Ten
----- Original Message -----
From: "Jack Peckham" <idyllhounds@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Sunday, August 03, 2003 4:31 PM
Subject: [amayausers] HELP!!! "Ethernet communications did not start
correctly"


> Hi, I just recieved my AMAYA friday afternoon. By the time I got it set
up,
> tech support had closed.
> Does anyone know the network protocol?
> Does it run TCP/IP? what IP address.
> It does not show up on my routers DHCP list.
>
> It came with a crossover cable. I tried hooking it up straight into my NIC
&
> got a light, but I get a message "Ethernet communications did not start
> correctly, restart computer" I did & still got the massage. Therefore, I
> hooked up my router with patch cables. Same problem. When I hooked up the
> router, I went into it & looked at the DHCP list, no AMAYA. I thought I
may
> have a NIC card problem, so I put in a card from an old computer & I still
> have the problem, so I am assuming I need to set up something in the
network
> protocols so the AMAYA can be seen???
>
> HELP!!!
>
> Thanks,
> Jack Peckham
> Greyt Threads
>
> jack@xxxxxxxxxxxxxxx
> web site www.idyllhounds.com
>
> _________________________________________________________________
> Tired of spam? Get advanced junk mail protection with MSN 8.
> http://join.msn.com/?page=features/junkmail
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: