[amayausers] Fw: small letters

> I would try the micro font to see how it looks.  Go 110-120% column width
> and use 4 - 4.5 density.  Make sure your stitch length is around 10-15
> depending on how tall your letters end up being (I'm guessing under .25").
> You might even try setting that small lettering as a seperate color change
> and using a smaller needle (65/9) and slowing the machine down a bit
> (probably 1000 SPM).  It is ideal to use 60 weight thread for the smaller
> needle but I only have a few spools of 60 and lately I have been using 40
> weight and the smaller needle and my small text has been looking great.  I
> would use solvy as well.
>
> Aaron Sargent
> The Linen Barn
> linen@xxxxxxxxxxx
> Medford, Oregon
> ----- Original Message ----- 
> From: "Evelyn Runge" <erunge@xxxxxxxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Wednesday, March 30, 2005 8:21 AM
> Subject: [amayausers] small letters
>
>
> > With the discussion of density, I have a problem with "small" letters. I
> > have a logo that I am working on right now that has 30 letters, not
> counting
> > spaces and they want it all on one line and 3.5" wide! Should I digitize
> > each letter rather than using  the "micro" font? If so, what would you
> > suggest for density, column width compensation etc. I have Design Shop
Pro
> > if that matters.
> >
> > TIA
> >
> > Evelyn
> > Express It With Thread
> >
> >
> >
>

Other related posts: