[amayausers] Re: Fw: OS situation

Ron,

Have you looked at the Network Bindings, especially the speed at which the 
system is now running at? It should be running at 10 Half Duplex in the 
Advanced tab under Configuration? There are some possibilities in this area. 
Is the computer that is running DS and/or AOS dedicated to the machines and 
is the computer Internet capable at this time? Are you running with a "hub" 
or a "switch"? Are you running with the "Flex" system in the "Advanced mode" 
instead of the cluster1, cluster 2, etc.?

I know that you stated that you are running the most current version 
7.00.....but  is it 018--045---046---050?

Feel free to give me a call if you need some help with the network bindings.

Rod Springer
Melco Tech & Trainer
208-938-3038

----- Original Message ----- 
From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, February 21, 2007 4:45 PM
Subject: [amayausers] Re: Fw: OS situation


>I realized also that machine number one keeps disappearing and
> reappearing I think this is when it sets itself to #4.
>
> If anyone has a thought.
>
> Ron Vinyard
> Body Cover / Magic Stitches
>
> 1-888-435-0176
> 541-471-1504 Fax 541-471-0427
>
> 420 SW H Street, Grants Pass, OR 97526-2532
>
> info@xxxxxxxxxxxxxxxxxxx
> www.bodycoverdesign.com
>
> ----- Original Message ----- 
> From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Wednesday, February 21, 2007 1:23 PM
> Subject: [amayausers] Fw: OS situation
>
>
>> ----- Original Message ----- 
>> From: Ron Vinyard
>> To: amayausers@xxxxxxxxxxxxx
>> Sent: Wednesday, February 21, 2007 12:22 PM
>> Subject: OS situation
>>
>>
>> Hey all,
>> we are using the most current OS version 7
>> and are running into an issue.
>> We have 4 machines each grouped as individual machines
>> and we have trouble with changing colors and moving the hoop at the
>> machine or changing color settings only to find out that right after
>> we started the OS switched to machine 4 instead of 2 that we were on.
>>
>> No matter what machine we seem to be adjusting it suddenly switches to 
>> machine 4.
>> if we turn off machine 4 then it changes everything to machine 3.
>>
>> We have restarted the computer and the OS several times and the problems 
>> still exists.
>> Also it just started recently and didn't start from the very first time 
>> we upgraded.
>>
>> If anyone has any ideas let me know as this is very frustrating but still 
>> workable.
>> Thanks in advance.
>>
>> Ron Vinyard
>> Body Cover / Magic Stitches
>>
>> 1-888-435-0176
>> 541-471-1504 Fax 541-471-0427
>>
>> 420 SW H Street, Grants Pass, OR 97526-2532
>>
>> info@xxxxxxxxxxxxxxxxxxx
>> www.bodycoverdesign.com
>>
>> ===========================================================
>>
>> The AmayaUsers Mailing List
>> Website: http://www.amayausers.com
>> Discussion Board: http://www.amayausers.com/boards
>> Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>> ===========================================================
>>
>>
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> =========================================================== 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: