[amayausers] Re: Font for Fleece

Hi Lynn,
I'm relatively new too so not sure I can give as much or good advice as the 
'seasoned' listers but what really works for me on a high pile fleece is to 
run the lettering twice. First time is with a high number value density just 
to get the pile to lay down. I think I adjust the stitch length too. I use 
the same or close color as the garment for this. Then I run the lettering 
again at regular values for the item over the top (all one .ofm file). The 
zig-zag underlay would be the same concept but I never seem to get the 
results I want so use the other method when necessary. I'm always concerned 
that with the higher pull comps. and satin stitch on fleece the pile is 
going to pop through the stitching. As I get better at this I'll hopefully 
get the hang of the zigzag underlay and what lettering works the best with 
it.
It all seems to be a learning curve and the listers give the best starting 
points. You have to take it from there and figure out what will work in your 
situation.
Good Luck!!
Wendy
Itchin' To Stich
MN


>From: "Linda Dart" <lynnsgraphics@xxxxxxx>
>Reply-To: amayausers@xxxxxxxxxxxxxxxx To: <amayausers@xxxxxxxxxxxxxxxx>
>Subject: [amayausers] amayausers] Font for Fleece
>Date: Thu, 12 Feb 2004 10:35:27 -0800
>
>Hi.
>
>I am new and need some advice, what type of font do you suggest, scripty 
>for doing on fleece pullovers so the lettering doesn't get lost in the 
>fleece?  Thanks
>
>Lynn Dart
>Lynn's Graphics & Embroidery
>1829  83rd Avenue SE
>Everett, WA  98205
>Phone 425-335-1744
>Cell 206-409-7203
>lynnsgraphics@xxxxxxx
>   ----- Original Message -----
>   From: Shannon Gorman
>   To: amayausers@xxxxxxxxxxxxxxxx
>   Sent: Thursday, February 12, 2004 10:08 AM
>   Subject: [amayausers] Bally Fitness
>
>
>   Does anyone have this digitized that they would sell cheap?
>
>   Thanks,
>   Shannon
>

_________________________________________________________________
Get some great ideas here for your sweetheart on Valentine's Day - and 
beyond. http://special.msn.com/network/celebrateromance.armx


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: