[amayausers.com] Re: Floor mats

This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY 
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/397/2.html#000020

All.....

Be gentle while rotating that "silver tube." This is the thread break sensor. 
Do not "spin" this tube, just gently rotate it back and forth. 

Inside of this tube, at both ends, is a "very' small rubber ball bearing that 
rides against the inside wall of the tube and sits in a depression made to 
retain it's position. 

By spinning the tube, you risk rotating the rubber ball bearing out of its 
socket and now you do have another problem to deal with....just as 
information...

Rod Springer
Amaya Tech & Trainer

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: