[amayausers.com] Re: Fills on cap fronts
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 21 Nov 2011 22:21:46 UT
This message was posted by ckramer on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1541.html
when digitizing for caps I know one wants to work from inside to outside and
bottom to top. When working with fills, say a rectangle, is just moving from
bottom to top of rectangle good enough to keep things nice or how does one move
from inside to outside using a fill. Have tried laying down 2 fills,
overlapping, but didn't really look quite right, plus that makes for addtional
trims which slow things down of course. ??? Just wanting to do it the best
way. Thanks.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
