[amayausers] Re: Expanded format, can I edit ?

Paul,

I am not sure what level of software you have and not sure which one it
takes.  I have Design Shop Pro+ and I can right click on an expanded  format
and change it to wireframe.  This enables you to edit the design.  Some .dst
designs can take alot of reworking to make them look good after either
making them bigger and or converting from expanded into wireframe.  I just
took a small .dst file and enlarged it for a jacket back and it didn't look
good at all.  I ended up re-digitizing 80% of the design.  It really depends
on the design and how much you increase the size.  Let me know if you can't
get it figured out and I could look at the design for you if you would like.

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR
----- Original Message -----
From: "Paul Tilton" <ptilton@xxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Sunday, December 28, 2003 8:33 PM
Subject: [amayausers] Expanded format, can I edit ?


> I have a design (customer's logo) in DST format, the elements are
> "expanded"... the design sews fine at its intended size, about 2.5" X
2.5",
> but my customer wants to put the design on a much larger item, making it
> about 7"X7"... I use Design Shop to enlarge the design, but when I sew it,
> the columns are not good, I think some of them need to be made into Fills,
> and I can't add underlay where I need to... Is there any way to edit the
> "expanded" format elements?
>
>
> Paul Tilton
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: