[amayausers.com] Re: Embroidery Placement

  • From: "Studio 187 LLC" <InsideStudio187@xxxxxxxxxxx>
  • To: <amayausers@xxxxxxxxxxxxx>
  • Date: Fri, 5 Oct 2007 18:26:25 -0400

Thanks Ed. My husband's reply was, "Whatever makes you happiest dear." so 
now what? ~GF


----- Original Message ----- 
From: e3m@xxxxxxx
To: amayausers@xxxxxxxxxxxxx
Sent: Friday, October 05, 2007 2:44 PM
Subject: [amayausers.com] Re: Embroidery Placement


Dear GF,
At times like these when we must re-invent the wheel...
Simply sew out a sample on some scrap material.  Cut this sewout close to 
the edge of the design.  Put a dot where the center of the design is on the 
sewout with a black marker.
Pin this sewout to your own pants leg and look at yourself in the mirror. 
Ask your friend, wife, husband, life partner, etc... what they think and 
move it if necessary.
Now take the measurements from the bottom and seam of the pants leg to the 
center of the design.

Remember that although there are "standards" in the industry for hooping 
placements, it really all boils down to what the customer likes, right?  And 
if the customer doesn't know what they like, then you tell them what they 
like.  Politely of course.
Ed

-------------- Original message from "Studio 187 LLC" 
<InsideStudio187@xxxxxxxxxxx>: -------------- 


> When embroidering on sweatpants, left leg logo, right leg name -- what are
> the correct center marks for each design/size. I can't find any literature
> on this. Thank you.
>
> GF
>
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> =========================================================== 


=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: