[amayausers.com] Re: Embroidering on Pashmina scarf

This message was posted by integrity on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/295.html

This is very soft and thin but dense weave/material, and I don't want a 
stabilizer to remain on either side between the stitches after sewing.  I was 
going to use two or three layers of lightweight EZee Aqua on each side, top and 
bottom, without wetting or steaming afterwards.  I just need something that 
will tear away real easy but hold the scarf sufficiently while sewing.  The 
sew-out is mostly column letters, about an inch tall and letter width between 
15 and 25 points and I thought to try an edge underlay to hold the width and 
run a higher MT just keep it from drawing up.  Should I try to change some of 
the amaya settings like the column feed or fill/run feed?  What about density 
or needle style (ball-point?) and size (smaller or larger to spread the fibers)?

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: