[amayausers.com] Re: Embroidering Barber Capes

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Sun, 20 Sep 2009 17:06:50 UT

This message was posted by Ian on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1035.html#000006

John, 
   Sharps and lower density should do it. Also, depending on the design, using 
the "proximity" filter would help. Just like leather, vinyl will not heal the 
penetrations, so simple low contrast designs will be your best bet. Also, I 
would use a cut-away backing and slow the speed a bit.

Ian

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: