[amayausers.com] Re: Embroidering Barber Capes
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 19 Sep 2009 00:58:21 UT
This message was posted by levelbest on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1035.html
Suggestions on the best way to go about this? We have a few that were sent to
us and while a good many turned out well, a few almost seemed to cutout the
logo into the cape (you know, hold it up to a light and you could see the
needle protrusions).
It's kind of a mixture between a wind breaker and a microfiber. I think some
of the problem is that these are not new but suggestions are welcome.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
