[amayausers] Re: EPS Import

Hi

Ruth at L and R Embroidery, I now have a new business email, can we transfer everything to that please.  lrembroidery@xxxxxxxxx

Thanking you in advance

Ruth Williams

lrembroidery



On Thu, 25 Aug 2005 08:53 , 'Jeff Banks' <banksje@xxxxxxxxxxx> sent:

Terri,

It may depend on the version of Paint Shop Pro. And I am not 100% up on the
latest versions of it. I also know JASC software who used to make it was
purchased by Corel. I used to use older versions for conversion of bitmapped
pictures etc. I am not really familiar with its Vector Capabilities but I
know in older versions it was limited. I have a feeling though, that as it
is now part of Corel the vector capabilities may not be full blown, if at
all so it does not compete with Corel Draw which sells for much more. I know
in earlier versions it would read certain formats in, but would not save
them out and was just for conversion to other formats, mainly bit mapped.

Jeff Banks
Melco Embroidery Systems


----- Original Message -----
From: "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Thursday, August 25, 2005 8:24 AM
Subject: [amayausers] Re: EPS Import


> Jeff,
>
> Thanks for all the information you share with us. Sometimes we get so
> frustrated trying to do something, then spend hours, yes hours, trying to
> figure it out when, in reality it is not anything we did. Information is
> the key.
>
> Do you know if files saved in eps in Paint Shop Pro can be brought into
> Design Shop Pro+ 2005 version successfully?
>
> Terri
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [amayausers-bounce@xxxxxxxxxxxxx','','','')">amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Banks
> Sent: Thursday, August 25, 2005 9:02 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: EPS Import
>
> Hi John,
>
> If you open them with a text editor like Notepad, you can see what program
> created them and the type of data in them. The information at the
> beginning
> of an EPS file usually contains this information. An EPS file is very
> easily
>
> read with a text editor.
>
> The original sent to you is made with Illustrator 11, and saved in 11
> format. I cannot open this file in Illustrator 8 at all, nor will it open
> in
>
> Design Shop nor will it open in Corel Draw 12. The other file or the one
> you
>
> saved as a version 8 shows it was created in Illustrator 12 and saved as
> an
> Illustrator 8 file. I am able to open it in Design Shop, I am able to open
> it in Illustrator 8 and I am able to open it in Corel Draw 12.
>
> I think from what you have seen with this exercise, that EPS files are not
> all created the same, nor is compatibility guaranteed between software
> version nor software vendors.
>
> Jeff Banks
> Melco Embroidery Systems
>
>
> ----- Original Message -----
> From: John Yaglenski
> To: amayausers@xxxxxxxxxxxxx
> Sent: Wednesday, August 24, 2005 10:12 PM
> Subject: [amayausers] Re: EPS Import
>
>
> Hi Jeff:
>
> I actually have the CS2 Suite, So it's actually illustrator 12 I work in.
> The logo I will send you is who knows what version of illustrator or
> coreldraw etc. They didn't say.
>
> I'm going to try the save as prior version (I can ony choose from CS2, CS,
> 10, 9, 8 or 3. They skip everything between 8 and 3 now I guess ;)
>
> See what works for you, and I will do the same.
>
> Thanks for your help.
>
> JOHN
>
> :-----Original Message-----
> :From: amayausers-bounce@xxxxxxxxxxxxx
> :[amayausers-bounce@xxxxxxxxxxxxx','','','')">amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Banks
> :Sent: Wednesday, August 24, 2005 10:32 PM
> :To: amayausers@xxxxxxxxxxxxx
> :Subject: [amayausers] Re: EPS Import
> :
> :John,
> :
> : EPS are not created equally. According to the EPS Gods, it is
> :supposed to be a universal type of format etc, except that
> :each and every company that makes software has its own way and
> :version of EPS file it makes. An EPS file is readable by any
> :text editor such as note pad etc. Open a few of them in
> :Notepad and look at the lines of commands and code, you will
> :see what I mean.
> :
> : First, when saving it as EPS, try saving as a down rev.
> :format of EPS, from Illustrator. What version of Illustrator
> :do you have. I have 8 at work, but save as EPS 7 or even
> :earlier to get best results all the time especially when
> :giving the file to others to read into different programs, not
> :just Design Shop. Of course, this depends on the information
> :in the EPS file. You realize that an EPS file can contain
> :bitmapped data? and not be a wire frame file at all? There are
> :so many variations and ways to put them together, and neither
> :Adobe, Corel, or any other graphic software I have used do it
> :the same way. Then of course there is the module used in
> :Design Shop that interprets EPS. As it is a third party
> :module, it does not interpret all EPS versions 100% either. It
> :does do 95% of all I have tried, but as I said, there are lots
> :of variations. Where did the file originally come from? Is
> :this something you created from scratch or was it sent to you?
> :
> : If that does not work, send me the file and let me look at it.
> :
> : Jeff Banks
> : Melco Embroidery Systems
> :
> :----- Original Message -----
> :From: "John Yaglenski" <john@xxxxxxxxxxxxx>
> :To: <amayausers@xxxxxxxxxxxxx>
> :Sent: Wednesday, August 24, 2005 7:31 PM
> :Subject: [amayausers] EPS Import
> :
> :
> :Hey All:
> :
> :Is there some special way that an eps file has to be saved in
> :order for it
> :to open in design shop? I have one that opens fine in Photoshop and
> :Illustrator but wont open in design shop. Here I thought
> :having a vector
> :file would be easy to convert, and I'm having to import it as
> :a graphic,
> :reconvert to vector and then convert to stitches.
> :
> :Jeff, maybe you might lend some insight into this. Is there
> :some specific
> :way we should be asking our clients to save the file... or is there
> :something I can do to save it in photoshop or illustrator that
> :will make it
> :compatible with design shop?
> :
> :Thanks!
> :
> :
> :- - - - - - - -
> :
> :
> :John Yaglenski
> :Levelbest Embroidery
> :
> :I: <http://www.levelbest.com/> www.levelbestembroidery.com
> :P: 301.591.2481 / 888.229.1779
> :F: 501-631-4544
> :
> :
> :This e-mail message and any attachments are confidential and may be
> :privileged. If you are not the intended recipient, please
> :notify Levelbest,
> :immediately -- by replying to this message or by sending an e-mail to
> : <john@xxxxxxxxxxxxx','','','')">john@xxxxxxxxxxxxx> john@xxxxxxxxxxxxx -- and destroy
> :all copies of
> :this message and any
> :attachments. Thank you.
> :
> :
> :
> :
>
>
>


Other related posts: