This message was posted by J&O Enterprises on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/27.html Dear Folks, This is my first post to this group. I am considering trading in my Melco 4/6T for 2 Amaya, original release with some upgrades. I typically sew the 4/6-T around 500 stiches per minute and have the maintenance routine down pretty goood. However, I average sewing 3 heads at a time due to various reasons. My questions are something to the affect of if I swap this for 2 Amaya's, am I going to see: 1. Higher quality product 2. At least same production level as the 4/6-T 3. Less thread breaks, etc. As a non-Amaya user, I am a bit fearful that I will trade in my limited (but predictable) machine that I own, for newer generation machines that may still break down. Would you Amaya users prefer 2 Amaya's, or to stick with a good running (owned) 4/6-T. Thank You very much for any thoughts on this topic. Jim W. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================