[amayausers] Re: Disabled Machine?

Hi Sue,

 Holding the STOP for a few seconds, (not sure how many, I am not at work to
look it up) will put the machine into Sleep Mode. Holding the Start key in
for a few seconds will wake it up.

 Jeff Banks
 Melco Embroidery Systems


----- Original Message ----- 
From: "Signature Embroidery" <sue@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Monday, January 12, 2004 8:08 PM
Subject: [amayausers] Disabled Machine?


> Hi,
>
> Don't know what I did but while backing up to the last sewn stitch after
> a thread break, the machine stopped, the light went out and the green
> light on the keypad was blinking slowly.  Amaya OS indicated that the
> machine was disabled.  I was able to finish the design on another
> machine so I'm not in any dire need of help, just wondering what I may
> have done and if it does happen again, how do I correct the situation.
> I could not find any reference to this in the owner's manual or help
> files.  Any ideas out there?
>
> Thank you,
> Sue
> Signature Embroidery
> sue@xxxxxxxxxxxxx
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: