[amayausers] Re: Designshop pro won't convert!

Roland,

I would have to see the image and see what is happening. Not all images, even vector images, are suitable for conversion. Many times there are colors or layers on layers, and depends on what detail is there to begin with. Depends on what type of object and other settings you are trying to convert.

Send me the file and let me look at it..

Jeff Banks
Melco Embroidery Systems

----- Original Message ----- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, August 22, 2005 7:01 AM
Subject: [amayausers] Re: Designshop pro won't convert!



I had not attached the image, Steve (and others)...was wondering if I was
following the wrong steps. I have the graphic images on disk from Vector
Collection, one disk is dxf, other disk is ai (.art) and .eps. Dxf doesn't
'show' in designshop, and I tried the same image in ai and .eps. One of the
versions came out as a horrible explosion like a plate of spaghetti...the
other one had the image perfect, but cannot convert it!
I do have Design Shop Pro....
so it should work!
I did not try to do the entire image-learned last year that just makes a
disaster. Tried ONE piece at a time and still crash the program.
Roland 
From: "Steve Cohen" <steve208321@xxxxxxxxxxx>
Reply-To: amayausers@xxxxxxxxxxxxx
Date: Fri, 19 Aug 2005 16:07:36 -0400
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: Designshop pro won't convert!

Your gif didn't show up. Can you email it to me and I can play with it
"Steve208321 at hotmail dot com"


From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Date: Fri, 19 Aug 2005 15:38:47 -0400
Am I doing something wrong? I have a graphic image (from Vector collection)
in both ai (.art) and eps format. Opened up in Designshop pro, can see the
image perfectly, and in project tree it is all 'vector fill'....and
following the book, page 246, every time I try to convert it...the program
crashes and shuts down. I don't even get the 'stitch vector object'
button-it is now called something else-and crashes it.
I need to get this done for a wedding next weekend....and havent' got the
time to sit and manually 'copy' it from scratch.
Is this another bug/glitch in the upgraded Designshop I've found?
anyone with any ideas let me know-I'll be pretty much gone from the office
until monday morning so leave me a direct email!
signman@xxxxxxxxxxxxxxxxxxx








Other related posts: