[amayausers] Re: Design Shop Help

Are you using Oesco CP?  If you are the closest point may be too close.  You
should be able to set the lock/trim tab at .00 and just make sure the box is
checked.  If that doesn't help then I am not sure you can do it without
doing it manually.

In the AMAYA OS under settings...  settings...  there is a place for jump
count for trims.  Mine is set at 3, maybe if you change that to 1 (0 is
disable which might disable the trims) it might help.

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR

----- Original Message -----
From: "Mark Middlekauff" <markm@xxxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Tuesday, September 30, 2003 8:35 AM
Subject: [amayausers] Design Shop Help


> When creating a name in alphabets, is there a way to have it auto trims
> between the letters? I've tried adjusting the lock/trim tab (down to .01
> now). I've applied it, hit the auto update and still no trims. We're using
> Oesco block, .382 high. I know you can put individual trims in the
lettering
> tab but all these names are already created. We have a job for 1500
> individual names on the right chest and I can't see having someone open
> every file and insert trims. So for us it's either take the time to modify
> these files or pay to trim. Am I just missing something or what?
>
>
>
>         Mark Middlekauff
>      Production/IT Manager
>       Consumer Concepts
>     (252) 247-7000 ext. 207
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: