[amayausers] Re: Daily Power up

Cindy,

Call me and I can walk you through it.  888-494-9035

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, Oregon
----- Original Message ----- 
From: "Cindy@xxxxxxxxx" <cindy@xxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Monday, July 26, 2004 9:25 AM
Subject: Re: [amayausers] Daily Power up


> Hugo, thanks for the quick response.
>
> Having a problem locating the optical sensor.  Any further directions?
>
> Thanks again,
> Cindy @ Finyl Vinyl
>
> ----- Original Message ----- 
> From: <HTorbidoni@xxxxxxx>
> To: <amayausers@xxxxxxxxxxxxxxxx>
> Sent: Monday, July 26, 2004 10:47 AM
> Subject: Re: [amayausers] Daily Power up
>
>
> > Cindy
> >
> > You have two optical sensors behind the needle case.
> > As you are looking at the needle case one is located behind the right
side
> of
> > the case about half way up from the bottom. It's purpose is to see the
> flag
> > that protrudes from the black cover behind the needle case. If it
doesn't
> see
> > the flag the machine will continue to move to the right until it finds
it.
> >
> > Once you find the optical sensor, try blowing any lint or dust off of
it.
> > Also check to see that the sensor is not rubbing on the flag which is
part
> of
> > the black cover directly behind the needle case. The flag should be
> centered
> > inside of the sensor but not touching it.
> >
> > Go into your maintenance menu and the go to Steppers and select
> "Home"under
> > color change.
> >
> > The needle case should go to needle #9.
> >
> > If the needle case goes all the way over past #1 again you may have to
put
> in
> > for a service call
> >
> > Hopes this helps.
> >
> > Hugo Torbidoni
> > H T  Embroidery Repair
> > Harpers Ferry WV
> >
> > 304-724-8846
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: