This message was posted by GF on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/1022.html Does anyone know how come some DST files don't convert all the jump stitches to trims? Without converting to wire frame . . . I have run into this several times. A group of designs I'm doing have textured fills so if I convert to wire frame to delete the jump stitches, it will lose the textured fill and replace with a plain satin so I need to avoid that. Any suggestions? BTW, I've tried lowering the jump stitch number to 1 and 2 and 3 on both the OS and DS without success. I have called tech support and they said they'd get back to me in about an hour . . . that was awhile ago of course, but hopefully they'll come up with an answer. Thought I'd throw it out to the board where the user knowledge seems to be! If I hear from tech support, I'll post their solution just in case this is a problem others experience. The design came from OESD in a DST format. Very well digitized except for some jump stitch issues. Thanks in advance for any help. GF =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================