[amayausers] Re: Caps - low profile parts

Don't be afraid to shop it out.  You can still make an excellent profit.

Maralien

Ed & Maralien Orantes
E.M. Broidery
900 Terry Parkway, Ste. 200
Terrytown, La. 70131
504-EMBROID (504-362-7643)
     or
504-433-0099 office
504-433-0100 fax 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Body Cover Staff
Sent: Friday, March 19, 2004 1:56 PM
To: amayausers@xxxxxxxxxxxxxxxx
Subject: [amayausers] Re: Caps - low profile parts


Hats are the thing I hate the most on Amayas
We got the WACF frames with the machines.
Our old machines used the standard frames and we
hardly ever have side emb, and when we do we hoop again and run it like 2
jobs.
do they make adapters to use the old hoops on the new machines?
or any answers for the variable thickness of 6 panel centers
or does everyone else stand and watch the machine sew and raise and lower
material thickness when it gets to the center?
Hard to get any real production that way.
Thanks for any input.
Ron Vinyard
Owner / Graphic Designer
Body Cover / Magic Stitches
420  S.W. "H" Street
Grants Pass, OR 97526-2532

1-888-435-0176
1-541-471-1504
Fax 541-471-0427
www.bodycoverdesign.com


----- Original Message ----- 
From: "Linen Barn" <linen@xxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Friday, March 19, 2004 11:22 AM
Subject: Re: [amayausers] Caps - low profile parts


> I think Tony is talking about the needle plate and the original post was
> about the wings on the cap driver itself.  They come with 2 sizes of
wings.
> I just remove the wings altogether as hats seem to sew better for me that
> way, although I don't use the WACF, I use hooptech cap frames.  They are
> easier to hoop and I get better results that way.
>
> Aaron Sargent
> The Linen Barn
> linen@xxxxxxxxxxx
> Medford, Oregon
> ----- Original Message -----
> From: "Chilmark UK" <tony@xxxxxxxxxxxxxxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxxxxx>
> Sent: Friday, March 19, 2004 9:47 AM
> Subject: Re: [amayausers] Caps - low profile parts
>
>
> > Your Amaya should have come with a right angled flat blade screwdriver
> which
> > is used to loosen the finger screws and the needle plate, make sure you
> > tighten the cap framewith  the screwdiver once you have installed it
> > otherwise the viabration causes the screws to work loose and end up
> messing
> > up the Garmets or hats your working on ( I speak from experience and an
> > expensive one)
> >
> > Regards
> >
> > Tony
> > ChilmarkUK
> > ----- Original Message -----
> > From: "Captain Gold" <captaingold@xxxxxxxxxxxxx>
> > To: <amayausers@xxxxxxxxxxxxxxxx>
> > Sent: Tuesday, March 16, 2004 3:59 PM
> > Subject: [amayausers] Caps - low profile parts
> >
> >
> > > Help! Can someone tell me how I'm supposed to loosen the four screws
> that
> > > hold on the cap supports on the driver? I'd like to put the supports
for
> > > the low profile caps on, but I can't unscrew the four thumb screws.
They
> > > came from the factory so tight that I can't budge them. I don't want
to
> > use
> > > a wrench for fear of damage.
> > >
> > > Thanks,
> > > Connie Bechtel
> > >
> > >
> > > Wyvern Productions
> > > Custom embroidery for the custom mind.
> > > http://www.wyvernproductions.com
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> > >
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: